Top 10 Security Assessment Tools

Fig1Figure 1: Top 5 network security scanners


The very first step in vulnerability assessment is to have a clear picture of what is happening on the network. Wireshark (previously named Ethereal) works in promiscuous mode to capture all traffic of a TCP broadcast domain.

Customised filters can be set to intercept specific traffic; for example, to capture communication between two IP addresses, or capture UDP-based DNS queries on the network. Traffic data can be dumped into a capture file, which can be reviewed later. Additional filters can also be set during the review.

Typically, the tester is looking for stray IP addresses, spoofed packets, unnecessary packet drops, and suspicious packet generation from a single IP address. Wireshark gives a broad and clear picture of what is happening on the network.

However, it does not have its own intelligence, and should be used as a data provider. Due to its great GUI, any person with even some basic knowledge can use it.


This is probably the only tool to remain popular for almost a decade. This scanner is capable of crafting packets and performing scans to a granular TCP level, such as SYN scan, ACK scan, etc. It has built-in signature-checking algorithms to guess the OS and version, based on network responses such as a TCP handshake.

Nmap is effective enough to detect remote devices, and in most cases correctly identifies firewalls, routers, and their make and model. Network administrators can use Nmap to check which ports are open, and also if those ports can be exploited further in simulated attacks. The output is plain text and verbose; hence, this tool can be scripted to automate routine tasks and to grab evidence for an audit report.


Once sniffing and scanning is done using the above tools, it’s time to go to the OS and application level. Metasploit is a fantastic, powerful open source framework that performs rigorous scans against a set of IP addresses.

Unlike many other frameworks, it can also be used for anti-forensics. Expert programmers can write a piece of code exploiting a particular vulnerability, and test it with Metasploit to see if it gets detected. This process can be reversed technically — when a virus attacks using some unknown vulnerability, Metasploit can be used to test the patch for it.

While this is a commercial tool, I have mentioned it here because the community edition is free, yet makes no compromises on the feature set.


The Nessus scanner is a famous commercial utility, from which OpenVAS branched out a few years back to remain open source. Though Metasploit and OpenVAS are very similar, there is still a distinct difference.

OpenVAS is split into two major components — a scanner and a manager. A scanner may reside on the target to be scanned and feed vulnerability findings to the manager. The manager collects inputs from multiple scanners and applies its own intelligence to create a report.

In the security world, OpenVAS is believed to be very stable and reliable for detecting the latest security loopholes, and for providing reports and inputs to fix them. A built-in Greenbone security assistant provides a GUI dashboard to list all vulnerabilities and the impacted machines on the network.

Creating detailed reports is one thing that makes OpenVAS a tool favoured by infrastructure security managers.


The list of network scanners would be incomplete without wireless security scanners. Today’s infrastructure contains wireless devices in the data centre as well as in corporate premises to facilitate mobile users. While having WPA-2 security is believed to be adequate for 802.11 WLAN standards, misconfiguration and the use of over-simple passwords leaves such networks open to attacks.

Aircrack is a suite of software utilities that acts as a sniffer, packet crafter and packet decoder. A targeted wireless network is subjected to packet traffic to capture vital details about the underlying encryption. A decryptor is then used to brute-force the captured file, and find out passwords. Aircrack is capable of working on most Linux distros, but the one in BackTrack Linux is highly preferred.

Fig2Figure 2: Top 5 web security scanners

The top five Web security assessment tools


Let’s start with this tool because of its feature set. This open source tool is widely used to scan websites, mainly because it supports HTTP and HTTPS, and also provides findings in an interactive fashion. Nikto can crawl a website just the way a human would, and that too in the least amount of time. It uses a technique called mutation, whereby it creates combinations of various HTTP tests together to form an attack, based on the Web server configuration and the hosted code.

Thus, it finds critical loopholes such as file upload misconfiguration, improper cookie handling, cross-scripting errors, etc. Nikto dumps all findings in a verbose mode, which helps in knowing more about the Web vulnerabilities, in detail. However, it can also result in too many things getting notified, some of which may be false alarms. Hence, care should be taken while interpreting Nikto logs.

Samurai framework

Once a baseline check is performed by Nikto, the next step is to take the “deep-dive” approach.Samurai is a framework — a bunch of powerful utilities, each one targeted for a specific set of vulnerabilities.

It comes as a Linux distribution, purely focusing on penetration-testing tools such as WebScarab for HTTP mapping, W3AF plugins for application-based attacks, and it also has tools to test browser-based exploits. It is amazing to note that the most recent version can find vulnerabilities that are usually not detected even by a few commercial software products.

Safe3 scanner

While the first two tools are good for static websites, for portals needing user ID and password, we need something that can deal with HTTP sessions and cookies. Safe3 scanner is a fantastic open source project, which has gained momentum and fame because it can handle almost all types of authentication, including NTLM.

It contains a Web crawler (a spider like that of search engines) capable of ignoring duplicate page scans and yet detect client-side JavaScript vulnerabilities. Safe3 scans also detect the possibility of the latest AJAX-based attacks and even report vulnerable script libraries. It comes with a user-friendly GUI and is capable of creating nice management reports.


Though very similar to Samurai, Websecurify also brings application-level assessment into play. In case of a large Web farm where code is maintained by a team of developers, following standards can sometimes yield insecure code like passwords mentioned in code, physical file paths in libraries, etc. Websecurify can traverse code and find such loopholes swiftly.

A nice feature is that it allows you to create screenshots of the problem areas automatically, which helps in preparing audit reports. It is one of the very few platform-independent tools and also supports mobile coding, which is helping it get more popular in the cyber-security assessment world.


Unless I mention a tool to detect SQL-injection attacks, this article would not be complete. Though this is a very old “first-generation” type of attack, many public websites still fail to fix it. SQLmap is capable of not just exploiting SQL-injection faults, but can also take over the database server. Since it focuses on a specific task, it works at great speed to fingerprint databases, find out the underlying file system and OS, and eventually fetch data from the server. It supports almost all well-known database engines, and can also perform password-guessing attacks. This tool can be combined with the other four tools mentioned above to scan a website aggressively.

A vulnerability assessment tool should include network scanning as well as website vulnerability exploitation. Open source software is prone to attacks too; hence, you must know about the reputed scanners and use them in their daily tasks to make their infrastructure secure and stable.

Content credit: TUBIDY